POWERGRIP YG-3 12-way power consul

The YG-3 is a different take on the entire concept of delivering clean mains power to an audio system, combining meticulous engineering with a level of flexibility that has to date been lacking in the category.

Designed from the ground up, it features 12 x mains outputs and can supply a total 3,680 watts of power to them. Six sockets are designed with a view to high current delivery, such as for the connection of amplifiers, while the other six are for more general use; a complement that should handle most systems with ease. Each socket is internally filtered, which can detect and clean even very small impurities to the feed.

The YG-3 also offers extensive protection against DC on the mains. Rather than an ‘all or nothing’ approach that can lead to over zealous shut down when any DC is present rather than an amount that is an actual issue, the YG-3 can be set to act when a pre-determined level of DC is detected, ensuring the your system is protected when it needs to be but otherwise works normally when harmless amounts of DC is present.

The twelve sockets can be set to be active all the time but they can also be assigned into six separate groups. These groups can be independently powered on and off depending on whether they are needed at the time. The shutdown and power up times can also be adjusted to allow for connected equipment to correctly shut down before the switch off occurs.

The filtering on the YG-3 can also be adjusted as well. Not every piece of audio equipment will benefit from external filtering and some companies actively advise against it. The YG-3 allows for sockets in a specific group to run unfiltered, while still benefiting from active surge and DC protection.

A 12v trigger allows for external startup and shut down, whilst full RS-232 protocol is available for custom installation use. The YG-3 is also equipped with WiFi, which allows for app control via a phone or tablet. Download and install the Ewelink app and you can access the extensive functionality of the YG-3 over network.

Electrical Characteristics
Voltage range for safe continuous operation of YG-3 PSU: 160 – 320 V
Maximum current of power cord and power socket: 16 A
Self power consumption: 1.4 W – 20 W depends on used features
Сonsumption in case of full power off by button 2: 0 W
Neutral pass through resistance: < 0.00005 Ohm
Live pass through resistance (high current hi-fi filter without fuse and fuse holder): 0.015 Ohm
Fuse Resistance: 0.01 Ohm (with holder), size 5 x 20mm, current 16 A
DC measure range: ± 999 mV
Maximum filtering DC value: 1.8 V
Maximum on/off delay: 60 sec
Protection Parameters
Protection voltage range (turn off connected devices): low: 190 V, high: 256 V
(May be influenced by other parameters like mains distortion to provide best protection and exclude false triggering)
High Voltage Surge Protection: Varistors
Setup Controls
Controls: 7 sensor buttons and full of switch on a bottom
Remote control: Wi-Fi (Ewelink APP)
Integration: (RTI, Сontrol4, Crestron etc.) Trigger, RS232
Screen menu: Brightness, color, style, filtration, always on sockets, delays
Auto switch on: Power sensor (detect connected device power state), light sensor
Package Contents
Power console
Power cord (2 m)
Rack mounts
Antenna grounding cable
Direct power cord connection blanket
General Data
Number of sockets: 12
Power cable cross size: 3.3 mm²
Cross size of power cables internal wiring: 3.3 mm² (High current Hi-Fi section)
Console weight: 7.6 kg
Dimensions (H x W x D): 156.5 х 440 х 280 mm (incl feet)

For more information on the POWERGRIP YG-3, contact us now.

For more product information, please view the POWERGRIP website here

Other POWERGRIP products